Enabling your Belong modem to work with amaysim

If you brought your Belong modem to a telco, such as TPG, Dodo or Exetel, before bringing it to amaysim, you may need to reset your modem to it’s factory settings so it can work with amaysim.


This guide covers Belong modems:

  • Belong DWA04135
  • Belong DWA0122
  • Belong 4353
  • Sagemcom 4315


Reset your modem to factory settings physically:

  1. With a pin or paperclip, find the hole at the back of your modem that says ‘Reset’
  2. Insert the pin or paperclip and hold it for about 10 seconds
  3. The lights of your modem should flash
  4. Allow 5 minutes for the reset to finalise - this will be completed when the lights are green


To reset your modem to factory settings using a browser:

  1. For Belong DWA04135 modems, type 192.168.1.254 into the browsers address bar and press enter
  2. For Belong DWA0122, 4353, and Sagemcom 4315 modems, type 10.0.0.138  into the browsers address bar and press enter
  3. Login with these details:
    • Username: admin
    • Password for DWA0122, 4353 or Sagemcom 4315: ‘Belong’
    • Password for DWA4135: this can be found at the back of the modem
  4. Navigate to ‘Advanced' and select ‘Management’
  5. Select ‘System Reset’ and then ‘Reset’
  6. Allow 5 minutes for the reset to finalise - this will be completed when the lights are green