Enabling your Netgear Nighthawk AX41/42/4300 modem to work with amaysim

This router is suitable for FTTP/FTTC/HFC. It will work if you have a separate VDSL2 modem connected to the FTTN/FTTB socket. If you’ve come from a provider such as iiNet or Dodo, you may need to change your internet settings, following these steps:

  1. In your internet browser, type 192.168.1.1 or http://www.routerlogin.com into the browsers address bar and press enter
  2. Login with these details:
    • Username: admin
    • Password: password or 1234
  3. Select ‘Basic’ and then ‘Internet’
  4. For Does your internet connection require a login?, select ‘No’
  5. For Internet IP address, select ‘Get dynamically from ISP’
  6. Select ‘Apply’
  7. Restart modem, if necessary

If you still cannot access the internet

Check if your router can obtain a WAN IP address from us.

  1. Select the homepage of 192.168.1.1 or http://www.routerlogin.com/ 
  2. Select the ‘Advanced’ tab
  3. Check that an IP address is shown. If 0.0.0.0 is shown, your router has not obtained an IP address from us.
  4. Turn off and unplug your modem
  5. Turn off the router
  6. Plug in the modem and turn it on. Wait 2 minutes.
  7. Turn on the router and wait 2 minutes.
     

User manual

Netgear Nighthawk AX41/42/4300